No

Item

Parameter

Remark

1

Suitable

Material

Type

Color coated steel

Width(mm)

1000

Thickness(mm)

0.4-0.7

Yield strength(MPA)

230-300

Coil capacity(T)

5

2

Forming Speed(m/min)

About 18

According to actual design

3

Roller Material

No.45 steel

with hard chrome painted.

4

Cutting Model

Hydraulic cutting

5

Power source

Type

380V/3PH/60HZ

Main motor power(KW)

4.4

According to actual design

Total power(KW)

7

According to actual design

6

Machinery Dimension

See layout

No

Name

Qt

Description

1

decoiler information

(capacity: 5t)

1 set

Structure: Arm-type

Expanding model: hydraulic

Releasing model: passively

2

Main

machine

Guiding device

1 set

Roll forming system

1 set

Roller inner supporting structure : guide colum

Post cutting device

1 set

Cutting blade material: Cr12 quenched treatment

3

Supporting table

2pcs

Dimension: 2*2m

4

PLC control system

1 set

1.Operation: screen+ button

2..MITSUBISH, Frequency

5

Hydraulic station

1 set

1Famouse Chinese brand

2. Will be displayed inside of the machine.

Decoiler:

1)Machine frame :welding structure with shot blasting treatment

2)Description: Put the coil to the mandrel, the hydraulic cylinder will tighten the coil.

Start the machine,

the hydraulic motor will drive the mandrel at first, then the steel sheet will be released. Take the

sheet

to the forming rollers and it will move automatically while the rollers run.

3)The light control is used to adjust the speed of releasing .

Guiding device: Adopting guiding bar and sliding block to control the width and position of the steel

sheet.

The sheet is guided in the correct position and runs to the roll forming equipment.

Roll Forming System:

1)Machine frame: welding structure with blasting treatment

2)The roller is made by high quality no.45 steel with hard chrome-painted

3) Roller inner supporting structure type: guiding column

4) Planetary gear speed reducer motor driven, back/forward roller driven by chain, part of upper/lower

rollers driven by gear.

5) Adjust the screw bar manually to adjust the distance between upper/lower rollers for different thickness

of sheet.

Other remark:

Cutting Device:

1) The cutting blade material is Cr12 with quenched treatment, there is no material wasted.

2) The power of cutting is provided by motor

Supporting Table:

To support the finished panels. The quantity we supply is 2 pieces with length 2000mm,

Electrical Control System: With PLC control and frequency speed adjusting technology to realize

the automatic

production.1.System provide good interface machine screen to set the batches, plate length, and

quantities.

2.Encoder calculation with the function of calculation and length measuring.

Hydraulic Station:

1.Provide power to tiling and cutting 2.Adopts separated hydraulic station

3. Main valve adopts China brand.